Mark Holdhusen

Mark Holdhusen's picture

Mark Holdhusen

Professor
UW-Marathon County
CSEPA

Office 381-D

mark.holdhusen@uwc.edu
(715) 261-6299
Curriculum Vitae 
Publications 

JOURNAL ARTICLES

  • Holdhusen, Mark Horner; Cunefare, Kenneth A., “Damping effects on the state-switched absorber used for vibration suppression,” Journal of Intelligent Material Systems and Structures, v 14, p 551-561, 2003.
  • Kenneth A. Cunefare, Van B. Biesel, John Tran, Ryan Rye, Aaron Graf, Mark Holdhusen, and Anne-Marie Albanese, “Anechoic chamber qualification: Traverse method, inverse square law analysis method, and nature of test signal,” Journal of the Acoustical Society of America, Volume 113, pp. 881-892, 2003.
  • Holdhusen, Mark and Cunefare, Kenneth, “A State-Switched Absorber Used for Vibration Control of Continuous Systems,” Journal of Vibration and Acoustics, Volume 129, Issue 5, page 577, October 2007.
  • Holdhusen, Mark and Cunefare, Kenneth, “Investigation of the Two-state, Maximum Work Extraction Switching Rule of a State-switched Absorber for Vibration Control,” Journal of Intelligent Material Systems and Structures, Volume 19, page 1245, November 2008.
  • Holdhusen, Mark and Cunefare, Kenneth, “Experimental Vibration Control of a Single-Degree of Freedom System Using a State-Switched Absorber,” Journal of Intelligent Material Systems and Structures, Volume 19, page 1435, December 2008.

CONFERENCE PRESENTATIONS AND PROCEEDINGS

Presentations with Refereed Proceedings

  • Holdhusen, Mark H.; Cunefare, Kenneth A., “Experimental vibration control of a two-degree of freedom, state-switched absorber system,” American Society of Mechanical Engineers, Dynamic Systems and Control Division, v 71, p 421-427, 2002.
  • Holdhusen, Mark and Cunefare, Kenneth, “Experimental Validation of a State-Switched Absorber Used to Control Vibrating Continuous Systems”, Proceedings of the American Society of Mechanical Engineers International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Long Beach, California, DETC2005-85021, 2005.
  • Holdhusen, Mark, “Design of an engineering graphics course for a pre-engineering program”, Proceedings of the American Society for Engineering Education Annual Conference & Exposition, Chicago, Illinois, 2006-1051, 2006.
  • Holdhusen, Mark, “The efficacy of an engineering graphics course for both students with and without prior engineering graphics experience,” Proceedings of the American Society for Engineering Education Annual Conference, Honolulu, Hawaii, 2007.
  • Holdhusen, Mark; James-Byrnes, Christa; and Rodriguez, Luis, ”Lesson study for a distance education statics course,” Proceedings of the American Society for Engineering Education Annual Conference & Exposition, Pittsburgh, PA, June 22 - 25, 2008.
  • Holdhusen, Mark, “Assessment of delivery modes of an engineering graphics course,” Proceedings of the American Society for Engineering Education Annual Conference & Exposition, Austin, TX, June 14 – 17, 2009.
  • Byrnes, Christa and Holdhusen, Mark, “Development and Delivery of a Project-Based Introductory Engineering Course for Online Delivery,” Proceedings of the American Society for Engineering Education Annual Conference & Exposition, San Antonio, TX, June, 2012. (Won First-year Programs Division Best Paper Award – 3rd Place.)
  • Douglas, Jamie and Holdhusen, Mark, “Development of Low-Cost, Hands-On Lab Experiments for an Online Mechanics of Materials Course,” Proceedings of the American Society for Engineering Education Annual Conference & Exposition, Atlanta, GA, June, 2013.
  • Holdhusen, Mark, “A ‘flipped’ statics classroom,” Proceedings of the American Society for Engineering Education Annual Conference & Exposition, Seattle, WA, June, 2015.

Presentations with Proceedings

  • Holdhusen, M.; Cunefare, K.A.; Larson, G., “The role of damping in the state-switched absorber for vibration control,” Proceedings of SPIE - The International Society for Optical Engineering, v 4326, p 232-242, 2001.
  • Holdhusen, M.; Cunefare, K.A., “Optimization of location and tuning of the state-switched absorber for controlling the vibration of a beam,” Proceedings of the SPIE - The International Society for Optical Engineering, v 5049, p 404-13, 2003.
  • Holdhusen, M. H.; Cunefare, K.A., “Optimization of a state-switched absorber applied to a continuous vibrating system,” Proceedings of the SPIE - The International Society for Optical Engineering, 5386-38, 2004.
  • Holdhusen, M. H.; Cunefare, K.A., “Investigation of the two-state, maximum work extraction switching rule of the state-switched absorber for vibration control,” The 2004 International Symposium on Active Control of Sound and Vibration, 2004.
  • Byrnes, Christa and Holdhusen, Mark, “Development and Delivery of a Project-Based Introductory Engineering Course for Online Delivery,” ASEE North Midwest Section Meeting, Duluth, MN, 2011
  • Douglas, Jamie and Holdhusen, Mark, “Development of Low-Cost, Hands-On Lab Experiments for an Online Mechanics of Materials Course,” ASEE North Midwest Section Meeting, St. Cloud, MN, 2012.

Presentations with Abstracts

  • Mark Holdhusen, Kenneth A. Cunefare, and Gregg Larson, “Experimental validation of the state-switched absorber for two-component harmonic forcing,” Journal of the Acoustical Society of America, v 109, p 2351, 2001.
  • Kenneth A. Cunefare, Van Biesel, Anne-Marie Albanese, Lisa Chang, and Mark Holdhusen, “Source dependency on anechoic chamber validation,” Journal of the Acoustical Society of America, v 109, p 2453, 2001.
  • Mark Holdhusen and Kenneth Cunefare, “Optimization of a state-switched absorber applied to a vibrating continuous system,” Journal of the Acoustical Society of America, v 113, p 2227, 2003.
  • Kenneth A. Cunefare, Van Biesel, Mark Holdhusen, Austin Shoemaker, “Design features for free-field qualification of a new semi-anechoic room, and qualification performance,” Journal of the Acoustical Society of America, v 114, p 2440, 2003.
  • Holdhusen, Mark, “Space-dependent damping for reducing vibration of continuous systems”, Journal of the Acoustical Society of America, v 119, p 3298, 2006.
  • Holdhusen, Mark, “Space-dependent damping for reducing vibration of continuous systems”, 151st Meeting of the Acoustical Society of America, Providence, Rhode Island, 2006.
  • Holdhusen, Mark, “An inexpensive approach to measure one-third octave reverberation times,” 158th Meeting of the Acoustical Society of America, San Antonio, Texas, October 2009.
  • Holdhusen, Mark, “Yeast flocculation using acoustic agglomeration,” 171st meeting of the Acoustical Society of America, Salt Lake City, UT, May, 2016.
Education 

Ph.D. in Mechanical Engineering, Georgia Institute of Technology, May 2005.

M.S. in Mechanical Engineering, Georgia Institute of Technology, August 2002.

B.M.E. with high distinction, University of Minnesota, August 1999.